guacamole-spice-protocol/libguac/include/client.h
2011-03-16 01:24:17 -07:00

288 lines
9.5 KiB
C

/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is libguac.
*
* The Initial Developer of the Original Code is
* Michael Jumper.
* Portions created by the Initial Developer are Copyright (C) 2010
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef _CLIENT_H
#define _CLIENT_H
#include <png.h>
#include "guacio.h"
/**
* Provides functions and structures required for defining (and handling) a proxy client.
*
* @file client.h
*/
/**
* The time to allow between sync responses in milliseconds. If a sync
* instruction is sent to the client and no response is received within this
* timeframe, server messages will not be handled until a sync instruction is
* received from the client.
*/
#define GUAC_SYNC_THRESHOLD 500
/**
* The time to allow between server sync messages in milliseconds. A sync
* message from the server will be sent every GUAC_SYNC_FREQUENCY milliseconds.
* As this will induce a response from a client that is not malfunctioning,
* this is used to detect when a client has died. This must be set to a
* reasonable value to avoid clients being disconnected unnecessarily due
* to timeout.
*/
#define GUAC_SYNC_FREQUENCY 5000
/**
* The amount of time to wait after handling server messages. If a client
* plugin has a message handler, and sends instructions when server messages
* are being handled, there will be a pause of this many milliseconds before
* the next call to the message handler.
*/
#define GUAC_SERVER_MESSAGE_HANDLE_FREQUENCY 50
typedef struct guac_client guac_client;
/**
* Handler for server messages (where "server" refers to the server that
* the proxy client is connected to).
*/
typedef int guac_client_handle_messages(guac_client* client);
/**
* Handler for Guacamole mouse events.
*/
typedef int guac_client_mouse_handler(guac_client* client, int x, int y, int button_mask);
/**
* Handler for Guacamole key events.
*/
typedef int guac_client_key_handler(guac_client* client, int keysym, int pressed);
/**
* Handler for Guacamole clipboard events.
*/
typedef int guac_client_clipboard_handler(guac_client* client, char* copied);
/**
* Handler for freeing up any extra data allocated by the client
* implementation.
*/
typedef int guac_client_free_handler(void* client);
/**
* Guacamole proxy client.
*
* Represents a Guacamole proxy client (the client which communicates to
* a server on behalf of Guacamole, on behalf of the web-client).
*/
struct guac_client {
/**
* The GUACIO structure to be used to communicate with the web-client. It is
* expected that the implementor of any Guacamole proxy client will provide
* their own mechanism of I/O for their protocol. The GUACIO structure is
* used only to communicate conveniently with the Guacamole web-client.
*/
GUACIO* io;
/**
* Reference to dlopen'd client plugin.
*/
void* client_plugin_handle;
/**
* Arbitrary reference to proxy client-specific data. Implementors of a
* Guacamole proxy client can store any data they want here, which can then
* be retrieved as necessary in the message handlers.
*/
void* data;
/**
* Handler for server messages. If set, this function will be called
* occasionally by the Guacamole proxy to give the client a chance to
* handle messages from whichever server it is connected to.
*
* Example:
* @code
* void handle_messages(guac_client* client);
*
* int guac_client_init(guac_client* client, int argc, char** argv) {
* client->handle_messages = handle_messages;
* }
* @endcode
*/
guac_client_handle_messages* handle_messages;
/**
* Handler for mouse events sent by the Gaucamole web-client.
*
* The handler takes the integer mouse X and Y coordinates, as well as
* a button mask containing the bitwise OR of all button values currently
* being pressed. Those values are:
*
* <table>
* <tr><th>Button</th> <th>Value</th></tr>
* <tr><td>Left</td> <td>1</td></tr>
* <tr><td>Middle</td> <td>2</td></tr>
* <tr><td>Right</td> <td>4</td></tr>
* <tr><td>Scrollwheel Up</td> <td>8</td></tr>
* <tr><td>Scrollwheel Down</td><td>16</td></tr>
* </table>
* Example:
* @code
* void mouse_handler(guac_client* client, int x, int y, int button_mask);
*
* int guac_client_init(guac_client* client, int argc, char** argv) {
* client->mouse_handler = mouse_handler;
* }
* @endcode
*/
guac_client_mouse_handler* mouse_handler;
/**
* Handler for key events sent by the Guacamole web-client.
*
* The handler takes the integer X11 keysym associated with the key
* being pressed/released, and an integer representing whether the key
* is being pressed (1) or released (0).
*
* Example:
* @code
* void key_handler(guac_client* client, int keysym, int pressed);
*
* int guac_client_init(guac_client* client, int argc, char** argv) {
* client->key_handler = key_handler;
* }
* @endcode
*/
guac_client_key_handler* key_handler;
/**
* Handler for clipboard events sent by the Guacamole web-client. This
* handler will be called whenever the web-client sets the data of the
* clipboard.
*
* This handler takes a single string which contains the text which
* has been set in the clipboard. This text is already unescaped from
* the Guacamole escaped version sent within the clipboard message
* in the protocol.
*
* Example:
* @code
* void clipboard_handler(guac_client* client, char* copied);
*
* int guac_client_init(guac_client* client, int argc, char** argv) {
* client->clipboard_handler = clipboard_handler;
* }
* @endcode
*/
guac_client_clipboard_handler* clipboard_handler;
/**
* Handler for freeing data when the client is being unloaded.
*
* This handler will be called when the client needs to be unloaded
* by the proxy, and any data allocated by the proxy client should be
* freed.
*
* Implement this handler if you store data inside the client.
*
* Example:
* @code
* void free_handler(guac_client* client);
*
* int guac_client_init(guac_client* client, int argc, char** argv) {
* client->free_handler = free_handler;
* }
* @endcode
*/
guac_client_free_handler* free_handler;
};
/**
* Handler which should initialize the given guac_client.
*/
typedef int guac_client_init_handler(guac_client* client, int argc, char** argv);
/**
* Initialize and return a new guac_client. The pluggable client will be chosen based on
* the first connect message received on the given file descriptor.
*
* @param client_fd The file descriptor associated with the socket associated with the connection to the
* web-client tunnel.
* @return A pointer to the newly initialized client.
*/
guac_client* guac_get_client(int client_fd);
/**
* Enter the main network message handling loop for the given client.
*
* @param client The proxy client to start handling messages of/for.
*/
void guac_start_client(guac_client* client);
/**
* Free all resources associated with the given client.
*
* @param client The proxy client to free all reasources of.
*/
void guac_free_client(guac_client* client);
/**
* Allocate a libpng-compatible buffer to hold raw image data.
*
* @param w The width of the buffer to allocate, in pixels.
* @param h The height of the buffer to allocate, in pixels.
* @param bpp The number of bytes per pixel (3 for RGB images, 4 for RGBA).
* @return A pointer to the newly allocated buffer.
*/
png_byte** guac_alloc_png_buffer(int w, int h, int bpp);
/**
* Free all memory associated with the given libpng-compatible buffer
* as allocated by guac_alloc_png_buffer.
*
* @param png_buffer The buffer to free.
* @param h The height of the buffer to free.
*/
void guac_free_png_buffer(png_byte** png_buffer, int h);
#endif