guacamole-spice-protocol/src/libguac/instruction.c

313 lines
9.8 KiB
C
Raw Normal View History

/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is libguac.
*
* The Initial Developer of the Original Code is
* Michael Jumper.
* Portions created by the Initial Developer are Copyright (C) 2010
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include "error.h"
#include "instruction.h"
#include "protocol.h"
#include "socket.h"
#include "unicode.h"
guac_instruction* guac_instruction_alloc() {
/* Allocate space for instruction */
guac_instruction* instruction = malloc(sizeof(guac_instruction));
if (instruction == NULL) {
guac_error = GUAC_STATUS_NO_MEMORY;
guac_error_message = "Insufficient memory to allocate instruction";
return NULL;
}
guac_instruction_reset(instruction);
return instruction;
}
void guac_instruction_reset(guac_instruction* instruction) {
2013-10-02 18:42:08 +00:00
instruction->opcode = NULL;
instruction->argc = 0;
instruction->state = GUAC_INSTRUCTION_PARSE_LENGTH;
2013-10-02 18:42:08 +00:00
instruction->__elementc = 0;
}
2013-10-02 03:23:20 +00:00
int guac_instruction_append(guac_instruction* instr,
void* buffer, int length) {
2013-10-02 03:23:20 +00:00
char* char_buffer = (char*) buffer;
int bytes_parsed = 0;
2013-10-02 03:23:20 +00:00
/* Do not exceed maximum number of elements */
if (instr->__elementc == GUAC_INSTRUCTION_MAX_ELEMENTS
&& instr->state != GUAC_INSTRUCTION_PARSE_COMPLETE) {
instr->state = GUAC_INSTRUCTION_PARSE_ERROR;
return 0;
}
/* Parse element length */
2013-10-02 03:23:20 +00:00
if (instr->state == GUAC_INSTRUCTION_PARSE_LENGTH) {
int parsed_length = 0;
while (bytes_parsed < length) {
/* Pull next character */
char c = *(char_buffer++);
bytes_parsed++;
/* If digit, add to length */
if (c >= '0' && c <= '9')
parsed_length = parsed_length*10 + c - '0';
/* If period, switch to parsing content */
else if (c == '.') {
2013-10-02 03:57:54 +00:00
instr->__element_length = parsed_length;
2013-10-03 22:38:22 +00:00
instr->__elementv[instr->__elementc++] = char_buffer;
2013-10-02 03:23:20 +00:00
instr->state = GUAC_INSTRUCTION_PARSE_CONTENT;
break;
}
/* If not digit, parse error */
else {
instr->state = GUAC_INSTRUCTION_PARSE_ERROR;
return 0;
}
}
/* If too long, parse error */
if (parsed_length > GUAC_INSTRUCTION_MAX_LENGTH) {
instr->state = GUAC_INSTRUCTION_PARSE_ERROR;
return 0;
}
2013-10-02 03:57:54 +00:00
} /* end parse length */
/* Parse element content */
2013-10-02 03:23:20 +00:00
if (instr->state == GUAC_INSTRUCTION_PARSE_CONTENT) {
2013-10-02 03:57:54 +00:00
2013-10-03 22:38:22 +00:00
while (bytes_parsed < length && instr->__element_length >= 0) {
2013-10-02 03:57:54 +00:00
2013-10-03 22:38:22 +00:00
/* Get length of current character */
char c = *char_buffer;
int char_length = guac_utf8_charsize((unsigned char) c);
2013-10-02 03:57:54 +00:00
2013-10-03 22:38:22 +00:00
/* If full character not present in buffer, stop now */
if (char_length + bytes_parsed > length)
break;
2013-10-02 03:57:54 +00:00
2013-10-03 22:38:22 +00:00
/* Record character as parsed */
bytes_parsed += char_length;
2013-10-02 03:57:54 +00:00
2013-10-03 22:38:22 +00:00
/* If end of element, handle terminator */
if (instr->__element_length == 0) {
2013-10-02 03:57:54 +00:00
2013-10-03 22:38:22 +00:00
*char_buffer = '\0';
2013-10-02 03:57:54 +00:00
2013-10-03 22:38:22 +00:00
/* If semicolon, store end-of-instruction */
if (c == ';') {
instr->state = GUAC_INSTRUCTION_PARSE_COMPLETE;
instr->opcode = instr->__elementv[0];
instr->argv = &(instr->__elementv[1]);
instr->argc = instr->__elementc - 1;
break;
}
/* If comma, move on to next element */
else if (c == ',') {
instr->state = GUAC_INSTRUCTION_PARSE_LENGTH;
break;
}
/* Otherwise, parse error */
else {
instr->state = GUAC_INSTRUCTION_PARSE_ERROR;
return 0;
}
} /* end if end of element */
/* Advance to next character */
instr->__element_length--;
char_buffer += char_length;
2013-10-02 03:57:54 +00:00
}
} /* end parse content */
return bytes_parsed;
}
/* Returns new instruction if one exists, or NULL if no more instructions. */
guac_instruction* guac_instruction_read(guac_socket* socket,
int usec_timeout) {
char* unparsed_end = socket->__instructionbuf_unparsed_end;
char* unparsed_start = socket->__instructionbuf_unparsed_start;
char* instr_start = socket->__instructionbuf_unparsed_start;
char* buffer_end = socket->__instructionbuf
+ sizeof(socket->__instructionbuf);
2013-10-02 06:21:49 +00:00
guac_instruction* instruction = guac_instruction_alloc();
2013-10-02 06:21:49 +00:00
while (instruction->state != GUAC_INSTRUCTION_PARSE_COMPLETE
&& instruction->state != GUAC_INSTRUCTION_PARSE_ERROR) {
2013-10-02 06:21:49 +00:00
/* Add any available data to buffer */
int parsed = guac_instruction_append(instruction, unparsed_start,
unparsed_end - unparsed_start);
2013-10-02 06:21:49 +00:00
/* Read more data if not enough data to parse */
if (parsed == 0) {
2013-10-02 06:21:49 +00:00
int retval;
2013-10-02 06:21:49 +00:00
/* If no space left to read, fail */
if (unparsed_end == buffer_end) {
/* Shift backward if possible */
if (instr_start != socket->__instructionbuf) {
memmove(socket->__instructionbuf, instr_start,
unparsed_end - instr_start);
unparsed_end -= instr_start - socket->__instructionbuf;
unparsed_start = instr_start = socket->__instructionbuf;
guac_instruction_reset(instruction);
}
/* Otherwise, no memory to read */
else {
guac_error = GUAC_STATUS_NO_MEMORY;
guac_error_message = "Instruction too long";
return NULL;
}
}
2013-10-02 06:21:49 +00:00
/* No instruction yet? Get more data ... */
retval = guac_socket_select(socket, usec_timeout);
if (retval <= 0)
return NULL;
/* Attempt to fill buffer */
retval = guac_socket_read(socket, unparsed_end,
buffer_end - unparsed_end);
2013-10-02 06:21:49 +00:00
/* Set guac_error if read unsuccessful */
if (retval < 0) {
guac_error = GUAC_STATUS_SEE_ERRNO;
guac_error_message = "Error filling instruction buffer";
return NULL;
}
2013-10-02 06:21:49 +00:00
/* EOF */
if (retval == 0) {
guac_error = GUAC_STATUS_NO_INPUT;
guac_error_message = "End of stream reached while "
"reading instruction";
return NULL;
}
/* Update internal buffer */
unparsed_end += retval;
2013-10-02 06:21:49 +00:00
}
2013-10-02 06:21:49 +00:00
/* If data was parsed, advance buffer */
else
unparsed_start += parsed;
2013-10-02 06:21:49 +00:00
} /* end while parsing data */
2013-10-02 06:21:49 +00:00
/* Fail on error */
if (instruction->state == GUAC_INSTRUCTION_PARSE_ERROR) {
guac_error = GUAC_STATUS_BAD_ARGUMENT;
guac_error_message = "Instruction parse error";
return NULL;
}
socket->__instructionbuf_unparsed_start = unparsed_start;
socket->__instructionbuf_unparsed_end = unparsed_end;
2013-10-02 06:21:49 +00:00
return instruction;
}
guac_instruction* guac_instruction_expect(guac_socket* socket, int usec_timeout,
const char* opcode) {
guac_instruction* instruction;
/* Wait for data until timeout */
if (guac_instruction_waiting(socket, usec_timeout) <= 0)
return NULL;
/* Read available instruction */
instruction = guac_instruction_read(socket, usec_timeout);
if (instruction == NULL)
return NULL;
/* Validate instruction */
if (strcmp(instruction->opcode, opcode) != 0) {
guac_error = GUAC_STATUS_BAD_STATE;
guac_error_message = "Instruction read did not have expected opcode";
guac_instruction_free(instruction);
return NULL;
}
/* Return instruction if valid */
return instruction;
}
void guac_instruction_free(guac_instruction* instruction) {
free(instruction);
}
int guac_instruction_waiting(guac_socket* socket, int usec_timeout) {
if (socket->__instructionbuf_unparsed_end >
socket->__instructionbuf_unparsed_start)
return 1;
return guac_socket_select(socket, usec_timeout);
}