guacamole-spice-protocol/src/protocols/ssh/ssh_client.c

/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is libguac-client-ssh.
 *
 * The Initial Developer of the Original Code is
 * Michael Jumper.
 * Portions created by the Initial Developer are Copyright (C) 2011
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 * James Muehlner <dagger10k@users.sourceforge.net>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include <stdio.h>
#include <string.h>
#include <pthread.h>

#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <netdb.h>
#include <errno.h>
#include <unistd.h>

#include <guacamole/client.h>
#include <guacamole/protocol.h>
#include <guacamole/socket.h>

#include <libssh2.h>

#include "client.h"
#include "common.h"
#include "guac_handlers.h"
#include "sftp.h"
#include "ssh_key.h"

/**
 * Reads a single line from STDIN.
 */
static char* prompt(guac_client* client, const char* title, char* str, int size, bool echo) {

    ssh_guac_client_data* client_data = (ssh_guac_client_data*) client->data;

    int pos;
    char in_byte;

    /* Get STDIN and STDOUT */
    int stdin_fd  = client_data->term->stdin_pipe_fd[0];
    int stdout_fd = client_data->term->stdout_pipe_fd[1];

    /* Print title */
    guac_terminal_write_all(stdout_fd, title, strlen(title));

    /* Make room for null terminator */
    size--;

    /* Read bytes until newline */
    pos = 0;
    while (pos < size && read(stdin_fd, &in_byte, 1) == 1) {

        /* Backspace */
        if (in_byte == 0x7F) {

            if (pos > 0) {
                guac_terminal_write_all(stdout_fd, "\b \b", 3);
                pos--;
            }
        }

        /* CR (end of input */
        else if (in_byte == 0x0D) {
            guac_terminal_write_all(stdout_fd, "\r\n", 2);
            break;
        }

        else {

            /* Store character, update buffers */
            str[pos++] = in_byte;

            /* Print character if echoing */
            if (echo)
                guac_terminal_write_all(stdout_fd, &in_byte, 1);
            else
                guac_terminal_write_all(stdout_fd, "*", 1);

        }

    }

    str[pos] = 0;
    return str;

}

void* ssh_input_thread(void* data) {

    guac_client* client = (guac_client*) data;
    ssh_guac_client_data* client_data = (ssh_guac_client_data*) client->data;

    char buffer[8192];
    int bytes_read;

    int stdin_fd = client_data->term->stdin_pipe_fd[0];

    /* Write all data read */
    while ((bytes_read = read(stdin_fd, buffer, sizeof(buffer))) > 0)
        libssh2_channel_write(client_data->term_channel, buffer, bytes_read);

    return NULL;

}

static int __sign_callback(LIBSSH2_SESSION* session,
        unsigned char** sig, size_t* sig_len,
        const unsigned char* data, size_t data_len, void **abstract) {

    ssh_key* key = (ssh_key*) abstract;

    /* Allocate space for signature */
    *sig = malloc(4096);

    /* Sign with key */
    *sig_len = ssh_key_sign(key, (const char*) data, data_len, *sig);
    if (*sig_len < 0)
        return 1;

    return 0;

}


static LIBSSH2_SESSION* __guac_ssh_create_session(guac_client* client) {

    int retval;

    int fd;
    struct addrinfo* addresses;
    struct addrinfo* current_address;

    char connected_address[1024];
    char connected_port[64];

    ssh_guac_client_data* client_data = (ssh_guac_client_data*) client->data;

    struct addrinfo hints = {
        .ai_family   = AF_UNSPEC,
        .ai_socktype = SOCK_STREAM,
        .ai_protocol = IPPROTO_TCP
    };

    /* Get socket */
    fd = socket(AF_INET, SOCK_STREAM, 0);

    /* Get addresses connection */
    if ((retval = getaddrinfo(client_data->hostname, client_data->port,
                    &hints, &addresses))) {

        guac_client_log_error(client,
                "Error parsing given address or port: %s",
                gai_strerror(retval));
        return NULL;

    }

    /* Attempt connection to each address until success */
    current_address = addresses;
    while (current_address != NULL) {

        int retval;

        /* Resolve hostname */
        if ((retval = getnameinfo(current_address->ai_addr,
                current_address->ai_addrlen,
                connected_address, sizeof(connected_address),
                connected_port, sizeof(connected_port),
                NI_NUMERICHOST | NI_NUMERICSERV)))
            guac_client_log_error(client, "Unable to resolve host: %s",
                    gai_strerror(retval));

        /* Connect */
        if (connect(fd, current_address->ai_addr,
                        current_address->ai_addrlen) == 0) {

            guac_client_log_info(client, "Successfully connected to "
                    "host %s, port %s", connected_address, connected_port);

            /* Done if successful connect */
            break;

        }

        /* Otherwise log information regarding bind failure */
        else
            guac_client_log_info(client, "Unable to connect to "
                    "host %s, port %s: %s",
                    connected_address, connected_port, strerror(errno));

        current_address = current_address->ai_next;

    }

    /* If unable to connect to anything, fail */
    if (current_address == NULL) {
        guac_client_log_error(client, "Unable to connect to any addresses.");
        return NULL;
    }

    /* Open SSH session */
    LIBSSH2_SESSION* session = libssh2_session_init_ex(NULL, NULL,
            NULL, client);
    if (session == NULL) {
        guac_client_log_error(client, "Session allocation failed");
        return NULL;
    }

    /* Perform handshake */
    if (libssh2_session_handshake(session, fd)) {
        guac_client_log_error(client, "SSH handshake failed");
        return NULL;
    }

    /* Authenticate with key if available */
    if (client_data->key != NULL) {
        if (!libssh2_userauth_publickey(session, client_data->username,
                    (unsigned char*) client_data->key->public_key,
                    client_data->key->public_key_length,
                    __sign_callback, (void**) client_data->key))
            return session;
        else {
            char* error_message;
            libssh2_session_last_error(session, &error_message, NULL, 0);
            guac_client_log_error(client,
                    "Public key authentication failed: %s", error_message);
            return NULL;
        }
    }

    /* Authenticate with password */
    if (!libssh2_userauth_password(session, client_data->username,
                client_data->password))
        return session;

    else {
        char* error_message;
        libssh2_session_last_error(session, &error_message, NULL, 0);
        guac_client_log_error(client,
                "Password authentication failed: %s", error_message);
        return NULL;
    }

}

void* ssh_client_thread(void* data) {

    guac_client* client = (guac_client*) data;
    ssh_guac_client_data* client_data = (ssh_guac_client_data*) client->data;

    char name[1024];

    guac_socket* socket = client->socket;
    char buffer[8192];
    int bytes_read = -1234;

    int stdout_fd = client_data->term->stdout_pipe_fd[1];

    pthread_t input_thread;

    libssh2_init(0);

    /* Get username */
    if (client_data->username[0] == 0 &&
            prompt(client, "Login as: ", client_data->username, sizeof(client_data->username), true) == NULL)
        return NULL;

    /* Send new name */
    snprintf(name, sizeof(name)-1, "%s@%s", client_data->username, client_data->hostname);
    guac_protocol_send_name(socket, name);

    /* If key specified, import */
    if (client_data->key_base64[0] != 0) {

        /* Attempt to read key without passphrase */
        client_data->key = ssh_key_alloc(client_data->key_base64,
                strlen(client_data->key_base64), "");

        /* On failure, attempt with passphrase */
        if (client_data->key == NULL) {

            /* Prompt for passphrase if missing */
            if (client_data->key_passphrase[0] == 0) {
                if (prompt(client, "Key passphrase: ",
                            client_data->key_passphrase,
                            sizeof(client_data->key_passphrase), false) == NULL)
                    return NULL;
            }

            /* Import key with passphrase */
            client_data->key = ssh_key_alloc(client_data->key_base64,
                    strlen(client_data->key_base64),
                    client_data->key_passphrase);

            /* If still failing, give up */
            if (client_data->key == NULL) {
                guac_client_log_error(client, "Auth key import failed.");
                return NULL;
            }

        } /* end decrypt key with passphrase */

        /* Success */
        guac_client_log_info(client, "Auth key successfully imported.");

    } /* end if key given */

    /* Otherwise, get password if not provided */
    else if (client_data->password[0] == 0) {
        if (prompt(client, "Password: ", client_data->password,
                sizeof(client_data->password), false) == NULL)
            return NULL;
    }

    /* Clear screen */
    guac_terminal_write_all(stdout_fd, "\x1B[H\x1B[J", 6);

    /* Open SSH session */
    client_data->session = __guac_ssh_create_session(client);
    if (client_data->session == NULL) {
        guac_protocol_send_error(socket, "Unable to create SSH session.",
                GUAC_PROTOCOL_STATUS_INTERNAL_ERROR);
        guac_socket_flush(socket);
        return NULL;
    }

    /* Open channel for terminal */
    client_data->term_channel =
        libssh2_channel_open_session(client_data->session);
    if (client_data->term_channel == NULL) {
        guac_protocol_send_error(socket, "Unable to open channel.",
                GUAC_PROTOCOL_STATUS_INTERNAL_ERROR);
        guac_socket_flush(socket);
        return NULL;
    }

    /* Start SFTP session as well, if enabled */
    if (client_data->enable_sftp) {

        /* Create SSH session specific for SFTP */
        client_data->sftp_ssh_session = __guac_ssh_create_session(client);

        /* Request SFTP */
        client_data->sftp_session =
            libssh2_sftp_init(client_data->sftp_ssh_session);
        if (client_data->sftp_session == NULL) {
            guac_protocol_send_error(socket, "Unable to start SFTP session..",
                    GUAC_PROTOCOL_STATUS_INTERNAL_ERROR);
            guac_socket_flush(socket);
            return NULL;
        }

        /* Set file handlers */
        client->ack_handler  = guac_sftp_ack_handler;
        client->file_handler = guac_sftp_file_handler;
        client->blob_handler = guac_sftp_blob_handler;
        client->end_handler  = guac_sftp_end_handler;

        guac_client_log_info(client, "SFTP session initialized");

    }

    /* Request PTY */
    if (libssh2_channel_request_pty_ex(client_data->term_channel,
            "linux", sizeof("linux")-1, NULL, 0,
            client_data->term->term_width, client_data->term->term_height,
            0, 0)) {
        guac_protocol_send_error(socket, "Unable to allocate PTY for channel.",
                GUAC_PROTOCOL_STATUS_INTERNAL_ERROR);
        guac_socket_flush(socket);
        return NULL;
    }

    /* Request shell */
    if (libssh2_channel_shell(client_data->term_channel)) {
        guac_protocol_send_error(socket, "Unable to associate shell with PTY.",
                GUAC_PROTOCOL_STATUS_INTERNAL_ERROR);
        guac_socket_flush(socket);
        return NULL;
    }

    /* Logged in */
    guac_client_log_info(client, "SSH connection successful.");

    /* Start input thread */
    if (pthread_create(&(input_thread), NULL, ssh_input_thread, (void*) client)) {
        guac_client_log_error(client, "Unable to start SSH input thread");
        return NULL;
    }

    /* While data available, write to terminal */
    while (!libssh2_channel_eof(client_data->term_channel)) {

        /* Repeat read if necessary */
        if ((bytes_read = libssh2_channel_read(client_data->term_channel, buffer, sizeof(buffer))) == LIBSSH2_ERROR_EAGAIN)
            continue;

        /* Attempt to write data received. Exit on failure. */
        if (bytes_read > 0) {
            int written = guac_terminal_write_all(stdout_fd, buffer, bytes_read);
            if (written < 0)
                break;
        }

    }

    /* Wait for input thread to die */
    pthread_join(input_thread, NULL);

    guac_client_log_info(client, "SSH connection ended.");
    return NULL;

}