From 70295fa77347598022c23671cfbf6d84837de1df Mon Sep 17 00:00:00 2001
From: maride <maride@darknebu.la>
Date: Thu, 23 Nov 2017 22:08:20 +0100
Subject: [PATCH] Add Cybersecurity logo

---
 Logo_Sogeti_Cybersecurity.scad | 77 ++++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100644 Logo_Sogeti_Cybersecurity.scad

diff --git a/Logo_Sogeti_Cybersecurity.scad b/Logo_Sogeti_Cybersecurity.scad
new file mode 100644
index 0000000..5987c05
--- /dev/null
+++ b/Logo_Sogeti_Cybersecurity.scad
@@ -0,0 +1,77 @@
+/*
+ * Logo of Sogeti, Department Cybersecurity
+ * (c) may apply
+ */
+
+// ---START SETTINGS---
+CIRCLE_RESOLUTION=36; // The resolution of the circles; strongly influents render time!
+THICKNESS=1; // the Z axis measurements, or "thickness"
+POINT_POSITION=3.5; // Positioning of the dots
+POINT_SIZE=1.5; // diameter of the dots
+LINE_WIDTH=0.5; // Width of the dot-connecting lines
+DRAW_SUPPORT=true; // Wether or not to draw the support for the inner part; should be enabled for 3D printing
+SUPPORT_WIDTH=0.25;
+// ---END SETTINGS---
+
+LOW_POINT=-sqrt(pow(POINT_POSITION, 2) - pow(POINT_POSITION/2, 2));
+
+translate([0, -LOW_POINT/3, 0])
+union() {
+    difference() {
+        // Base background
+        intersection() {
+            translate([-POINT_POSITION/2, 0, 0])
+            cylinder(h=THICKNESS, d=10, $fn=CIRCLE_RESOLUTION);
+            translate([POINT_POSITION/2, 0, 0])
+            cylinder(h=THICKNESS, d=10, $fn=CIRCLE_RESOLUTION);
+            translate([0, LOW_POINT, 0])
+            cylinder(h=THICKNESS, d=10, $fn=CIRCLE_RESOLUTION);
+        }
+
+        // dots
+        translate([-POINT_POSITION/2, 0, 0])
+        cylinder(h=THICKNESS, d=POINT_SIZE, $fn=CIRCLE_RESOLUTION);
+        translate([POINT_POSITION/2, 0, 0])
+        cylinder(h=THICKNESS, d=POINT_SIZE, $fn=CIRCLE_RESOLUTION);
+        translate([0, LOW_POINT, 0])
+        cylinder(h=THICKNESS, d=POINT_SIZE, $fn=CIRCLE_RESOLUTION);
+        
+        // connecting lines
+        rotate([0, 0, 0])
+        translate([-POINT_POSITION/2, -LINE_WIDTH/2, 0])
+        cube([POINT_POSITION, LINE_WIDTH, THICKNESS]);
+        
+        translate([POINT_POSITION/4, LOW_POINT/2, 0])
+        rotate([0, 0, 60])
+        translate([-POINT_POSITION/2, -LINE_WIDTH/2, 0])
+        cube([POINT_POSITION, LINE_WIDTH, THICKNESS]);
+        
+        translate([-POINT_POSITION/4, LOW_POINT/2, 0])
+        rotate([0, 0, 120])
+        translate([-POINT_POSITION/2, -LINE_WIDTH/2, 0])
+        cube([POINT_POSITION, LINE_WIDTH, THICKNESS]);
+    }
+
+    // supports to avoid a floating inner part
+    if(DRAW_SUPPORT) {
+        difference() {
+            // Support cylinders
+            union() {
+                translate([-POINT_POSITION/2, 0, THICKNESS/8])
+                cylinder(h=THICKNESS*3/4, d=POINT_SIZE+SUPPORT_WIDTH, $fn=CIRCLE_RESOLUTION);
+                translate([POINT_POSITION/2, 0, THICKNESS/8])
+                cylinder(h=THICKNESS*3/4, d=POINT_SIZE+SUPPORT_WIDTH, $fn=CIRCLE_RESOLUTION);
+                translate([0, LOW_POINT, THICKNESS/8])
+                cylinder(h=THICKNESS*3/4, d=POINT_SIZE+SUPPORT_WIDTH, $fn=CIRCLE_RESOLUTION);
+            }
+            
+            // dots
+            translate([-POINT_POSITION/2, 0, 0])
+            cylinder(h=THICKNESS, d=POINT_SIZE, $fn=CIRCLE_RESOLUTION);
+            translate([POINT_POSITION/2, 0, 0])
+            cylinder(h=THICKNESS, d=POINT_SIZE, $fn=CIRCLE_RESOLUTION);
+            translate([0, LOW_POINT, 0])
+            cylinder(h=THICKNESS, d=POINT_SIZE, $fn=CIRCLE_RESOLUTION);
+        }
+    }
+}
\ No newline at end of file