From 3221838c6563432667938cdc89c207195cc210b2 Mon Sep 17 00:00:00 2001
From: maride <maride@darknebu.la>
Date: Tue, 12 Dec 2017 11:12:32 +0100
Subject: [PATCH] Add Raspberry Pi 2020 Zipmount

---
 Raspi_2020_Zipmount.scad | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Raspi_2020_Zipmount.scad

diff --git a/Raspi_2020_Zipmount.scad b/Raspi_2020_Zipmount.scad
new file mode 100644
index 0000000..5d98f0b
--- /dev/null
+++ b/Raspi_2020_Zipmount.scad
@@ -0,0 +1,34 @@
+// Helpful to look into this pdf: https://www.raspberrypi.org/documentation/hardware/raspberrypi/mechanical/Raspberry-Pi-3B-V1.2-Mechanical.pdf
+
+RPI_HOLE_DIST=49;
+RPI_HOLE_SPACING=0.5;
+RPI_HOLE_POS=6;
+ZIPTIE_WIDTH=6;
+ZIPTIE_HEIGHT=2;
+HEIGHT=8;
+THICKNESS=5;
+
+translate([0, -THICKNESS, 0])
+difference() {
+    cube([RPI_HOLE_DIST + HEIGHT, THICKNESS, HEIGHT]);
+    translate([HEIGHT/2-ZIPTIE_HEIGHT/2, 0, HEIGHT/2-ZIPTIE_WIDTH/2])
+    cube([ZIPTIE_HEIGHT, HEIGHT, ZIPTIE_WIDTH]);
+    translate([RPI_HOLE_DIST+HEIGHT/2-ZIPTIE_HEIGHT/2, 0, HEIGHT/2-ZIPTIE_WIDTH/2])
+    cube([ZIPTIE_HEIGHT, HEIGHT, ZIPTIE_WIDTH]);
+}
+
+translate([(RPI_HOLE_DIST + HEIGHT)/2-16, 0, 0]) {
+    difference() {
+        cube([32, 32, HEIGHT]);
+        translate([6, 6, 0])
+        cube([21, 21, HEIGHT]);
+    }
+
+    translate([16.5, 16.5, 0])
+    for(i = [0:90:270]) {
+        rotate([0, 0, i])
+        translate([-3, -1.5, 0])
+        translate([0, 11, 0])
+        cube([5.5, 3, HEIGHT]);
+    }
+}
\ No newline at end of file